Table top

Wood range Natural Wood range Natural Wood range Natural Wood range Natural Wood range Natural Lamella width 45 mm (+/- 2 mm) Lamella width 45 mm (+/- 2 mm) Lamella width 45 mm (+/- 2 mm) Lamella width 45 mm (+/- 2 mm) Lamella width 45 mm (+/- 2 mm) Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Origin Poland Origin Poland Origin Poland Origin Poland Origin Poland Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Vernacular name Alnus glutinosa Gaertn Vernacular name Alnus glutinosa Gaertn Vernacular name Alnus glutinosa Gaertn Vernacular name Alnus glutinosa Gaertn Vernacular name Alnus glutinosa Gaertn Side A (best side) Light grey colour, possible presence of low quantities of small healthy knots < or = 1.5 cm, puttied or not before sanding Side A (best side) Light grey colour, possible presence of low quantities of small healthy knots < or = 1.5 cm, puttied or not before sanding Side A (best side) Light grey colour, possible presence of low quantities of small healthy knots < or = 1.5 cm, puttied or not before sanding Side A (best side) Light grey colour, possible presence of low quantities of small healthy knots < or = 1.5 cm, puttied or not before sanding Side A (best side) Light grey colour, possible presence of low quantities of small healthy knots < or = 1.5 cm, puttied or not before sanding Side B (worst side) Identical to face A Side B (worst side) Identical to face A Side B (worst side) Identical to face A Side B (worst side) Identical to face A Side B (worst side) Identical to face A Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight to corrugated Wood grain Straight Types of wood Alder Types of wood Alder Types of wood Alder Types of wood Alder Types of wood Alder Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed

Types of wood Oak Types of wood Oak Types of wood Oak Types of wood Oak Types of wood Oak Manufacturing Edge glued Manufacturing Edge glued Manufacturing Edge glued Manufacturing Edge glued Manufacturing Edge glued Wood range Rustic Wood range Rustic Wood range Rustic Wood range Rustic Wood range Rustic Lamella width 30 to 150 mm, multiple widths possible per panel Lamella width 30 to 150 mm, multiple widths possible per panel Lamella width 30 to 150 mm, multiple widths possible per panel Lamella width 30 to 150 mm, multiple widths possible per panel Lamella width 30 to 150 mm, multiple widths possible per panel Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Origin France Origin France Origin France Origin France Origin France Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Vernacular name Quercus pedunculata Ehrh Vernacular name Quercus pedunculata Ehrh Vernacular name Quercus pedunculata Ehrh Vernacular name Quercus pedunculata Ehrh Vernacular name Quercus pedunculata Ehrh Side A (best side) Presence of healthy sapwood, healthy knots puttied before sanding, some traces of mesh. Side A (best side) Presence of healthy sapwood, healthy knots puttied before sanding, some traces of mesh. Side A (best side) Presence of healthy sapwood, healthy knots puttied before sanding, some traces of mesh. Side A (best side) Presence of healthy sapwood, healthy knots puttied before sanding, some traces of mesh. Side A (best side) Presence of healthy sapwood, healthy knots puttied before sanding, some traces of mesh. Side B (worst side) Identical to face A + healthy sapwood without limit, healthy knots puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + healthy sapwood without limit, healthy knots puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + healthy sapwood without limit, healthy knots puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + healthy sapwood without limit, healthy knots puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + healthy sapwood without limit, healthy knots puttied before sanding, possible presence of small chapped parts. Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight

Types of wood Beech Types of wood Beech Types of wood Beech Types of wood Beech Types of wood Beech Manufacturing Edge glued Manufacturing Edge glued Manufacturing Edge glued Manufacturing Edge glued Manufacturing Edge glued Wood range Rustic Wood range Rustic Wood range Rustic Wood range Rustic Wood range Rustic Lamella width 35 to 90 mm / Multiple widths possible per panel Lamella width 35 to 90 mm / Multiple widths possible per panel Lamella width 35 to 90 mm / Multiple widths possible per panel Lamella width 35 to 90 mm / Multiple widths possible per panel Lamella width 35 to 90 mm / Multiple widths possible per panel Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Origin France Origin France Origin France Origin France Origin France Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Vernacular name Fagus silvatica L. Vernacular name Fagus silvatica L. Vernacular name Fagus silvatica L. Vernacular name Fagus silvatica L. Vernacular name Fagus silvatica L. Side A (best side) Presence of healthy sapwood, healthy knots of diameter < 5 cm and puttied before sanding, traces of red heartwood. Side A (best side) Presence of healthy sapwood, healthy knots of diameter < 5 cm and puttied before sanding, traces of red heartwood. Side A (best side) Presence of healthy sapwood, healthy knots of diameter < 5 cm and puttied before sanding, traces of red heartwood. Side A (best side) Presence of healthy sapwood, healthy knots of diameter < 5 cm and puttied before sanding, traces of red heartwood. Side A (best side) Presence of healthy sapwood, healthy knots of diameter < 5 cm and puttied before sanding, traces of red heartwood. Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight Side B (worst side) Identical to face A + sapwood is allowed on all lamellas, putty knots are allowed any size and number, possible traces of hearts Side B (worst side) Identical to face A + sapwood is allowed on all lamellas, putty knots are allowed any size and number, possible traces of hearts Side B (worst side) Identical to face A + sapwood is allowed on all lamellas, putty knots are allowed any size and number, possible traces of hearts Side B (worst side) Identical to face A + sapwood is allowed on all lamellas, putty knots are allowed any size and number, possible traces of hearts Side B (worst side) Identical to face A + sapwood is allowed on all lamellas, putty knots are allowed any size and number, possible traces of hearts

Types of wood Oak Types of wood Oak Types of wood Oak Types of wood Oak Types of wood Oak Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Wood range Natural Wood range Natural Wood range Natural Wood range Natural Wood range Natural Lamella width 40 mm (+/- 2 mm) only one width per panel Lamella width 40 mm (+/- 2 mm) only one width per panel Lamella width 40 mm (+/- 2 mm) only one width per panel Lamella width 40 mm (+/- 2 mm) only one width per panel Lamella width 40 mm (+/- 2 mm) only one width per panel Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Origin Europe Origin Europe Origin Europe Origin Europe Origin Europe Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Vernacular name Quercus pedunculata Ehrh Vernacular name Quercus pedunculata Ehrh Vernacular name Quercus pedunculata Ehrh Vernacular name Quercus pedunculata Ehrh Vernacular name Quercus pedunculata Ehrh Side A (best side) Presence of healthy sapwood, healthy knots puttied before sanding, few traces of mesh. Side A (best side) Presence of healthy sapwood, healthy knots puttied before sanding, few traces of mesh. Side A (best side) Presence of healthy sapwood, healthy knots puttied before sanding, few traces of mesh. Side A (best side) Presence of healthy sapwood, healthy knots puttied before sanding, few traces of mesh. Side A (best side) Presence of healthy sapwood, healthy knots puttied before sanding, few traces of mesh. Side B (worst side) Identical to face A + possible presence of very limited quantity of small pinholes (puttied or not) and tiny sections of missing wood (puttied or not), possible presence of small chapped parts. Side B (worst side) Identical to face A + possible presence of very limited quantity of small pinholes (puttied or not) and tiny sections of missing wood (puttied or not), possible presence of small chapped parts. Side B (worst side) Identical to face A + possible presence of very limited quantity of small pinholes (puttied or not) and tiny sections of missing wood (puttied or not), possible presence of small chapped parts. Side B (worst side) Identical to face A + possible presence of very limited quantity of small pinholes (puttied or not) and tiny sections of missing wood (puttied or not), possible presence of small chapped parts. Side B (worst side) Identical to face A + possible presence of very limited quantity of small pinholes (puttied or not) and tiny sections of missing wood (puttied or not), possible presence of small chapped parts. Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight

Types of wood Oak Types of wood Oak Types of wood Oak Types of wood Oak Types of wood Oak Manufacturing Edge glued Manufacturing Edge glued Manufacturing Edge glued Manufacturing Edge glued Manufacturing Edge glued Wood range Noble Wood range Noble Wood range Noble Wood range Noble Wood range Noble Lamella width 35 to 90 mm / Multiple widths possible per panel Lamella width 35 to 90 mm / Multiple widths possible per panel Lamella width 35 to 90 mm / Multiple widths possible per panel Lamella width 35 to 90 mm / Multiple widths possible per panel Lamella width 35 to 90 mm / Multiple widths possible per panel Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Origin France, Germany Origin France, Germany Origin France, Germany Origin France, Germany Origin France, Germany Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Vernacular name Quercus pedunculata Ehrh Vernacular name Quercus pedunculata Ehrh Vernacular name Quercus pedunculata Ehrh Vernacular name Quercus pedunculata Ehrh Vernacular name Quercus pedunculata Ehrh Side B (worst side) Identical to face A + healthy sapwood Side B (worst side) Identical to face A + healthy sapwood Side B (worst side) Identical to face A + healthy sapwood Side B (worst side) Identical to face A + healthy sapwood Side B (worst side) Identical to face A + healthy sapwood Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight Side A (best side) A few healthy knots, mesh traces Side A (best side) A few healthy knots, mesh traces Side A (best side) A few healthy knots, mesh traces Side A (best side) A few healthy knots, mesh traces Side A (best side) A few healthy knots, mesh traces

Types of wood Beech Types of wood Beech Types of wood Beech Types of wood Beech Types of wood Beech Manufacturing Edge glued Manufacturing Edge glued Manufacturing Edge glued Manufacturing Edge glued Manufacturing Edge glued Wood range Noble Wood range Noble Wood range Noble Wood range Noble Wood range Noble Lamella width 35 to 90 mm / Multiple widths possible per panel Lamella width 35 to 90 mm / Multiple widths possible per panel Lamella width 35 to 90 mm / Multiple widths possible per panel Lamella width 35 to 90 mm / Multiple widths possible per panel Lamella width 35 to 90 mm / Multiple widths possible per panel Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Origin Slovakia, Poland, Germany Origin Slovakia, Poland, Germany Origin Slovakia, Poland, Germany Origin Slovakia, Poland, Germany Origin Slovakia, Poland, Germany Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Vernacular name Fagus silvatica L. Vernacular name Fagus silvatica L. Vernacular name Fagus silvatica L. Vernacular name Fagus silvatica L. Vernacular name Fagus silvatica L. Side A (best side) Small healthy knots of diameter less than 1 cm, a few brown marks characteristic of beech in very limited quantity Side A (best side) Small healthy knots of diameter less than 1 cm, a few brown marks characteristic of beech in very limited quantity Side A (best side) Small healthy knots of diameter less than 1 cm, a few brown marks characteristic of beech in very limited quantity Side A (best side) Small healthy knots of diameter less than 1 cm, a few brown marks characteristic of beech in very limited quantity Side A (best side) Small healthy knots of diameter less than 1 cm, a few brown marks characteristic of beech in very limited quantity Side B (worst side) Identical to face A + small knots of diameter < 1 cm, traces of brown marks characteristic of beechwood, traces of red heartwood in limited quantities, possible presence of small chapped parts. Side B (worst side) Identical to face A + small knots of diameter < 1 cm, traces of brown marks characteristic of beechwood, traces of red heartwood in limited quantities, possible presence of small chapped parts. Side B (worst side) Identical to face A + small knots of diameter < 1 cm, traces of brown marks characteristic of beechwood, traces of red heartwood in limited quantities, possible presence of small chapped parts. Side B (worst side) Identical to face A + small knots of diameter < 1 cm, traces of brown marks characteristic of beechwood, traces of red heartwood in limited quantities, possible presence of small chapped parts. Side B (worst side) Identical to face A + small knots of diameter < 1 cm, traces of brown marks characteristic of beechwood, traces of red heartwood in limited quantities, possible presence of small chapped parts. Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Certification PEFC™ 100% - PEFC/10-31-2383 Certification PEFC™ 100% - PEFC/10-31-2383 Certification PEFC™ 100% - PEFC/10-31-2383 Certification PEFC™ 100% - PEFC/10-31-2383 Certification PEFC™ 100% - PEFC/10-31-2383 Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight

Types of wood Beech Types of wood Beech Types of wood Beech Types of wood Beech Types of wood Beech Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Wood range Natural Wood range Natural Wood range Natural Wood range Natural Wood range Natural Lamella width 30 to 50 mm / Only one width per panel Lamella width 30 to 50 mm / Only one width per panel Lamella width 30 to 50 mm / Only one width per panel Lamella width 30 to 50 mm / Only one width per panel Lamella width 30 to 50 mm / Only one width per panel Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Origin Europe Origin Europe Origin Europe Origin Europe Origin Europe Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Vernacular name Fagus silvatica L. Vernacular name Fagus silvatica L. Vernacular name Fagus silvatica L. Vernacular name Fagus silvatica L. Vernacular name Fagus silvatica L. Side A (best side) Presence of healthy sapwood, healthy knots of diameter < 2 cm and puttied before sanding, traces of red heartwood. Side A (best side) Presence of healthy sapwood, healthy knots of diameter < 2 cm and puttied before sanding, traces of red heartwood. Side A (best side) Presence of healthy sapwood, healthy knots of diameter < 2 cm and puttied before sanding, traces of red heartwood. Side A (best side) Presence of healthy sapwood, healthy knots of diameter < 2 cm and puttied before sanding, traces of red heartwood. Side A (best side) Presence of healthy sapwood, healthy knots of diameter < 2 cm and puttied before sanding, traces of red heartwood. Side B (worst side) Identical to face A + healthy knots of a diameter of less than 4 cm and puttied before sanding, traces of brown marks characteristic of beechwood (also called traces of red heartwood) without limit, tiny sections of missing wood, puttied or not, possible presence of small chapped parts. Side B (worst side) Identical to face A + healthy knots of a diameter of less than 4 cm and puttied before sanding, traces of brown marks characteristic of beechwood (also called traces of red heartwood) without limit, tiny sections of missing wood, puttied or not, possible presence of small chapped parts. Side B (worst side) Identical to face A + healthy knots of a diameter of less than 4 cm and puttied before sanding, traces of brown marks characteristic of beechwood (also called traces of red heartwood) without limit, tiny sections of missing wood, puttied or not, possible presence of small chapped parts. Side B (worst side) Identical to face A + healthy knots of a diameter of less than 4 cm and puttied before sanding, traces of brown marks characteristic of beechwood (also called traces of red heartwood) without limit, tiny sections of missing wood, puttied or not, possible presence of small chapped parts. Side B (worst side) Identical to face A + healthy knots of a diameter of less than 4 cm and puttied before sanding, traces of brown marks characteristic of beechwood (also called traces of red heartwood) without limit, tiny sections of missing wood, puttied or not, possible presence of small chapped parts. Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight

Types of wood Bamboo Types of wood Bamboo Types of wood Bamboo Types of wood Bamboo Types of wood Bamboo Manufacturing Multi-ply Manufacturing Multi-ply Manufacturing Multi-ply Manufacturing Multi-ply Manufacturing Multi-ply Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Origin China Origin China Origin China Origin China Origin China Gluing D3 glue compliant with the NF-EN-204 standard. Formaldehyde emission: < 0.124 mg/m3 (E1 standard) Gluing D3 glue compliant with the NF-EN-204 standard. Formaldehyde emission: < 0.124 mg/m3 (E1 standard) Gluing D3 glue compliant with the NF-EN-204 standard. Formaldehyde emission: < 0.124 mg/m3 (E1 standard) Gluing D3 glue compliant with the NF-EN-204 standard. Formaldehyde emission: < 0.124 mg/m3 (E1 standard) Gluing D3 glue compliant with the NF-EN-204 standard. Formaldehyde emission: < 0.124 mg/m3 (E1 standard) Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Vernacular name Bambuseae Vernacular name Bambuseae Vernacular name Bambuseae Vernacular name Bambuseae Vernacular name Bambuseae Central ply Permitted for edges (at the end): possible presence of small non-puttied hollows caused by a lack of bamboo fibres and not visible at cutting. Central ply Permitted for edges (at the end): possible presence of small non-puttied hollows caused by a lack of bamboo fibres and not visible at cutting. Central ply Permitted for edges (at the end): possible presence of small non-puttied hollows caused by a lack of bamboo fibres and not visible at cutting. Central ply Permitted for edges (at the end): possible presence of small non-puttied hollows caused by a lack of bamboo fibres and not visible at cutting. Central ply Permitted for edges (at the end): possible presence of small non-puttied hollows caused by a lack of bamboo fibres and not visible at cutting.

Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Vernacular name Bambuseae Vernacular name Bambuseae Vernacular name Bambuseae Vernacular name Bambuseae Vernacular name Bambuseae Central ply Permitted for edges (at the end): possible presence of small non-puttied hollows caused by a lack of bamboo fibres and not visible at cutting. Central ply Core made up of butt-jointed glued-laminated solid wood planks glued to the exterior ply at right angles (90°) to them (end grain at the sides of the panel). Central ply Permitted for edges (at the end): possible presence of small non-puttied hollows caused by a lack of bamboo fibres and not visible at cutting. Central ply Permitted for edges (at the end): possible presence of small non-puttied hollows caused by a lack of bamboo fibres and not visible at cutting. Central ply Permitted for edges (at the end): possible presence of small non-puttied hollows caused by a lack of bamboo fibres and not visible at cutting. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Types of wood Bamboo Types of wood Bamboo Types of wood Bamboo Types of wood Bamboo Types of wood Bamboo Origin China Origin China Origin China Origin China Origin China Gluing D3 glue compliant with the NF-EN-204 standard. Formaldehyde emission: < 0.124 mg/m3 (E1 standard) Gluing D3 glue compliant with the NF-EN-204 standard. Formaldehyde emission: < 0.124 mg/m3 (E1 standard) Gluing D3 glue compliant with the NF-EN-204 standard. Formaldehyde emission: < 0.124 mg/m3 (E1 standard) Gluing D3 glue compliant with the NF-EN-204 standard. Formaldehyde emission: < 0.124 mg/m3 (E1 standard) Gluing D3 glue compliant with the NF-EN-204 standard. Formaldehyde emission: < 0.124 mg/m3 (E1 standard)

Types of wood Beech Types of wood Beech Types of wood Beech Types of wood Beech Types of wood Beech Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Wood range Premium Wood range Premium Wood range Premium Wood range Premium Wood range Premium Lamella width 40 mm (+/- 2 mm) only one width per panel Lamella width 40 mm (+/- 2 mm) only one width per panel Lamella width 40 mm (+/- 2 mm) only one width per panel Lamella width 40 mm (+/- 2 mm) only one width per panel Lamella width 40 mm (+/- 2 mm) only one width per panel Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Origin Europe Origin Europe Origin Europe Origin Europe Origin Europe Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Vernacular name Fagus silvatica L. Vernacular name Fagus silvatica L. Vernacular name Fagus silvatica L. Vernacular name Fagus silvatica L. Vernacular name Fagus silvatica L. Side A (best side) Limited quantity of small brown marks Side A (best side) Limited quantity of small brown marks Side A (best side) Limited quantity of small brown marks Side A (best side) Limited quantity of small brown marks Side A (best side) Limited quantity of small brown marks Side B (worst side) Identical to face A + small knots of diameter < 1 cm, traces of brown marks characteristic of beechwood, traces of red heartwood in limited quantities, possible presence of small chapped parts. Side B (worst side) Identical to face A + small knots of diameter < 1 cm, traces of brown marks characteristic of beechwood, traces of red heartwood in limited quantities, possible presence of small chapped parts. Side B (worst side) Identical to face A + small knots of diameter < 1 cm, traces of brown marks characteristic of beechwood, traces of red heartwood in limited quantities, possible presence of small chapped parts. Side B (worst side) Identical to face A + small knots of diameter < 1 cm, traces of brown marks characteristic of beechwood, traces of red heartwood in limited quantities, possible presence of small chapped parts. Side B (worst side) Identical to face A + small knots of diameter < 1 cm, traces of brown marks characteristic of beechwood, traces of red heartwood in limited quantities, possible presence of small chapped parts. Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight

Types of wood Oak Types of wood Oak Types of wood Oak Types of wood Oak Types of wood Oak Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Wood range Premium Wood range Premium Wood range Premium Wood range Premium Wood range Premium Lamella width 40 mm (+/- 2 mm) only one width per panel Lamella width 40 mm (+/- 2 mm) only one width per panel Lamella width 40 mm (+/- 2 mm) only one width per panel Lamella width 40 mm (+/- 2 mm) only one width per panel Lamella width 40 mm (+/- 2 mm) only one width per panel Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Origin France, Germany Origin France, Germany Origin France, Germany Origin France, Germany Origin France, Germany Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Vernacular name Quercus pedunculata Ehrh Vernacular name Quercus pedunculata Ehrh Vernacular name Quercus pedunculata Ehrh Vernacular name Quercus pedunculata Ehrh Vernacular name Quercus pedunculata Ehrh Side A (best side) Possible presence of low quantities of small healthy knots, puttied or not before sanding, few mesh traces. Side A (best side) Possible presence of low quantities of small healthy knots, puttied or not before sanding, few mesh traces. Side A (best side) Possible presence of low quantities of small healthy knots, puttied or not before sanding, few mesh traces. Side A (best side) Possible presence of low quantities of small healthy knots, puttied or not before sanding, few mesh traces. Side A (best side) Possible presence of low quantities of small healthy knots, puttied or not before sanding, few mesh traces. Side B (worst side) Identical to face A + healthy sapwood and healthy knots puttied or not before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + healthy sapwood and healthy knots puttied or not before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + healthy sapwood and healthy knots puttied or not before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + healthy sapwood and healthy knots puttied or not before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + healthy sapwood and healthy knots puttied or not before sanding, possible presence of small chapped parts. Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight

Types of wood Maple Types of wood Maple Types of wood Maple Types of wood Maple Types of wood Maple Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Wood range Premium Wood range Premium Wood range Premium Wood range Premium Wood range Premium Lamella width Thickness 26 mm: lamelllas of 40 mm (+/- 5 mm) / Thickness 40 mm: lamellas of 35 mm (+/- 5 mm) Lamella width Thickness 26 mm: lamelllas of 40 mm (+/- 5 mm) / Thickness 40 mm: lamellas of 35 mm (+/- 5 mm) Lamella width Thickness 26 mm: lamelllas of 40 mm (+/- 5 mm) / Thickness 40 mm: lamellas of 35 mm (+/- 5 mm) Lamella width Thickness 26 mm: lamellas of 35 mm (+/- 3 mm) / Thickness 40 mm: lamellas of 40 mm (+/- 3 mm) Lamella width Thickness 26 mm: lamellas of 35 mm (+/- 3 mm) / Thickness 40 mm: lamellas of 40 mm (+/- 3 mm) Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Origin Poland Origin Poland Origin Poland Origin Poland Origin Poland Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Vernacular name Acer pseudoplatanus L. Vernacular name Acer pseudoplatanus L. Vernacular name Acer pseudoplatanus L. Vernacular name Acer pseudoplatanus L. Vernacular name Acer pseudoplatanus L. Side A (best side) A few healthy knots, mesh traces Side A (best side) A few healthy knots, mesh traces Side A (best side) A few healthy knots, mesh traces Side A (best side) A few healthy knots, mesh traces Side A (best side) A few healthy knots, mesh traces Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight

Types of wood Cherry Types of wood Cherry Types of wood Cherry Types of wood Cherry Types of wood Birch Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Wood range Premium Wood range Premium Wood range Premium Wood range Premium Wood range Premium Lamella width Thickness 26 mm: lamelllas of 40 mm (+/- 5 mm) / Thickness 40 mm: lamellas of 35 mm (+/- 5 mm) Lamella width Thickness 26 mm: lamelllas of 40 mm (+/- 5 mm) / Thickness 40 mm: lamellas of 35 mm (+/- 5 mm) Lamella width Thickness 26 mm: lamelllas of 40 mm (+/- 5 mm) / Thickness 40 mm: lamellas of 35 mm (+/- 5 mm) Lamella width Thickness 26 mm: lamellas of 35 mm (+/- 3 mm) / Thickness 40 mm: lamellas of 40 mm (+/- 3 mm) Lamella width Thickness 26 mm: lamellas of 35 mm (+/- 3 mm) / Thickness 40 mm: lamellas of 40 mm (+/- 3 mm) Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Origin Europe Origin Europe Origin Europe Origin Europe Origin Europe Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Vernacular name Prunus avium Vernacular name Prunus avium Vernacular name Prunus avium Vernacular name Prunus avium Vernacular name Prunus avium Side A (best side) A few healthy knots, mesh traces Side A (best side) A few healthy knots, mesh traces Side A (best side) A few healthy knots, mesh traces Side A (best side) A few healthy knots, mesh traces Side A (best side) A few healthy knots, mesh traces Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight

Types of wood Birch Types of wood Birch Types of wood Birch Types of wood Birch Types of wood Birch Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Wood range Premium Wood range Premium Wood range Premium Wood range Premium Wood range Premium Lamella width Thickness 18 mm: Lamellas of 40 mm (+/- 4 mm) / Thickness 26 and 40 mm: lamellas of 40 mm (+/- 3 mm) Lamella width Thickness 18 mm: Lamellas of 40 mm (+/- 4 mm) / Thickness 26 and 40 mm: lamellas of 40 mm (+/- 3 mm) Lamella width Thickness 18 mm: Lamellas of 40 mm (+/- 4 mm) / Thickness 26 and 40 mm: lamellas of 40 mm (+/- 3 mm) Lamella width Thickness 18 mm: Lamellas of 40 mm (+/- 4 mm) / Thickness 26 and 40 mm: lamellas of 40 mm (+/- 3 mm) Lamella width Thickness 18 mm: Lamellas of 40 mm (+/- 4 mm) / Thickness 26 and 40 mm: lamellas of 40 mm (+/- 3 mm) Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Origin Poland Origin Poland Origin Poland Origin Poland Origin Poland Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Vernacular name Betula spp Vernacular name Betula spp Vernacular name Betula spp Vernacular name Betula spp Vernacular name Betula spp Side A (best side) A few healthy knots, mesh traces Side A (best side) A few healthy knots, mesh traces Side A (best side) A few healthy knots, mesh traces Side A (best side) A few healthy knots, mesh traces Side A (best side) A few healthy knots, mesh traces Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Certification FSC-C107727 SGSCH-COC-009014 Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight

Types of wood Rubber Types of wood Rubber Types of wood Rubber Types of wood Rubber Types of wood Rubber Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Wood range Premium Wood range Premium Wood range Premium Wood range Premium Wood range Premium Lamella width planks with widths of 40 to 70 mm, only one width per panel Lamella width planks with widths of 40 to 70 mm, only one width per panel Lamella width planks with widths of 40 to 70 mm, only one width per panel Lamella width planks with widths of 40 to 70 mm, only one width per panel Lamella width planks with widths of 40 to 70 mm, only one width per panel Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Origin Vietnam Origin Vietnam Origin Vietnam Origin Vietnam Origin Vietnam Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Vernacular name Hevea brasiliensis Vernacular name Hevea brasiliensis Vernacular name Hevea brasiliensis Vernacular name Hevea brasiliensis Vernacular name Hevea brasiliensis Side A (best side) A few healthy knots and traces of mesh. Possible presence of insect bites in limited quantities (these traces testify to the presence of insects when the tree was still standing, the insects having been eliminated during the wood drying phases). Possible presence of rubber residues (whitish traces). Side A (best side) A few healthy knots and traces of mesh. Possible presence of insect bites in limited quantities (these traces testify to the presence of insects when the tree was still standing, the insects having been eliminated during the wood drying phases). Possible presence of rubber residues (whitish traces). Side A (best side) A few healthy knots and traces of mesh. Possible presence of insect bites in limited quantities (these traces testify to the presence of insects when the tree was still standing, the insects having been eliminated during the wood drying phases). Possible presence of rubber residues (whitish traces). Side A (best side) A few healthy knots and traces of mesh. Possible presence of insect bites in limited quantities (these traces testify to the presence of insects when the tree was still standing, the insects having been eliminated during the wood drying phases). Possible presence of rubber residues (whitish traces). Side A (best side) A few healthy knots and traces of mesh. Possible presence of insect bites in limited quantities (these traces testify to the presence of insects when the tree was still standing, the insects having been eliminated during the wood drying phases). Possible presence of rubber residues (whitish traces). Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Side B (worst side) Identical to face A + few traces of healthy sapwood and healthy knots of diameter < 2 cm puttied before sanding, possible presence of small chapped parts. Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Wood grain Straight or interlocked Wood grain Straight or interlocked Wood grain Straight or interlocked Wood grain Straight or interlocked Wood grain Straight or interlocked

Types of wood Acacia Types of wood Acacia Types of wood Acacia Types of wood Acacia Types of wood Acacia Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Wood range Natural Wood range Natural Wood range Natural Wood range Natural Wood range Natural Lamella width 30 to 70 mm Lamella width 30 to 70 mm Lamella width 30 to 70 mm Lamella width 30 to 70 mm Lamella width 30 to 70 mm Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Origin Vietnam Origin Vietnam Origin Vietnam Origin Vietnam Origin Vietnam Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Vernacular name Acacia mangium Vernacular name Acacia mangium Vernacular name Acacia mangium Vernacular name Acacia mangium Vernacular name Acacia mangium Side A (best side) Presence of healthy sapwood, low quantity of small healthy knots < or = 1.5 cm, puttied or not before sanding Possible presence of insect bites in limited quantities (these traces testify to the presence of insects when the tree was still standing, the insects having been eliminated during the wood drying phases). Side A (best side) Presence of healthy sapwood, low quantity of small healthy knots < or = 1.5 cm, puttied or not before sanding Possible presence of insect bites in limited quantities (these traces testify to the presence of insects when the tree was still standing, the insects having been eliminated during the wood drying phases). Side A (best side) Presence of healthy sapwood, low quantity of small healthy knots < or = 1.5 cm, puttied or not before sanding Possible presence of insect bites in limited quantities (these traces testify to the presence of insects when the tree was still standing, the insects having been eliminated during the wood drying phases). Side A (best side) Presence of healthy sapwood, low quantity of small healthy knots < or = 1.5 cm, puttied or not before sanding Possible presence of insect bites in limited quantities (these traces testify to the presence of insects when the tree was still standing, the insects having been eliminated during the wood drying phases). Side A (best side) Presence of healthy sapwood, low quantity of small healthy knots < or = 1.5 cm, puttied or not before sanding Possible presence of insect bites in limited quantities (these traces testify to the presence of insects when the tree was still standing, the insects having been eliminated during the wood drying phases). Side B (worst side) Identical to face A Side B (worst side) Identical to face A Side B (worst side) Identical to face A Side B (worst side) Identical to face A Side B (worst side) Identical to face A Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Edges In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Solid wood This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products. Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight Wood grain Straight

Types of wood Valchromat® Types of wood Valchromat® Types of wood Valchromat® Types of wood Valchromat® Types of wood Valchromat® Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Origin Portugal Origin Portugal Origin Portugal Origin Portugal Origin Portugal Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames

Types of wood Valchromat® Types of wood Valchromat® Types of wood Valchromat® Types of wood Valchromat® Types of wood Valchromat® Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Origin Portugal Origin Portugal Origin Portugal Origin Portugal Origin Portugal Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames

Types of wood Valchromat® Types of wood Valchromat® Types of wood Valchromat® Types of wood Valchromat® Types of wood Valchromat® Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Origin Portugal Origin Portugal Origin Portugal Origin Portugal Origin Portugal Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames

Types of wood Valchromat® Types of wood Valchromat® Types of wood Valchromat® Types of wood Valchromat® Types of wood Valchromat® Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Origin Portugal Origin Portugal Origin Portugal Origin Portugal Origin Portugal Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames

Types of wood Valchromat® Types of wood Valchromat® Types of wood Valchromat® Types of wood Valchromat® Types of wood Valchromat® Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Manufacturing MDF (Medium Density Fiberboard) Origin Portugal Origin Portugal Origin Portugal Origin Portugal Origin Portugal Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Dimensional tolerances Thickness: +/-0.3 mm | Dimensions: +/- 2 mm Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Fire classification > or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable) Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Water-repellent Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Other technical characteristics Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils. Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames Cacher l'info sur le sens des lames

Types of wood Ash Types of wood Ash Types of wood Ash Types of wood Ash Types of wood Ash Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Manufacturing Finger jointed Wood range Premium Wood range Premium Wood range Premium Wood range Premium Wood range Premium Lamella width 40 mm (+/- 2 mm) only one width per panel Lamella width 40 mm (+/- 2 mm) only one width per panel Lamella width 40 mm (+/- 2 mm) only one width per panel Lamella width 40 mm (+/- 2 mm) only one width per panel Lamella width 40 mm (+/- 2 mm) only one width per panel Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Finishing Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish. Origin Poland Origin Poland Origin Poland Origin Poland Origin Poland Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Gluing Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Hygrometry rate 8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses. Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Dimensional tolerances Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Lamellas direction Length-wise Vernacular name Fraxinus excelsior Vernacular name Fraxinus excelsior Vernacular name