Name: Red Valchromat® (MDF) medium worktop
Price: 216.3 EUR
Availability: InStock

Types of wood	Valchromat®
Manufacturing	MDF
Origin	Portugal
Dimensional tolerances	Thickness: +/-0.3 mm \| Dimensions: +/- 2 mm
Fire classification	> or = 12 to < or = 30 (class D-s2, d0). M3 classification according to standard En 13501 (mildly flammable)
Water-repellent	Moisture-resistant, it is indicated for interior use but can also be used for exterior applications under shelter (equivalent to class 2). In all cases, it is recommended to apply a finish.
Other technical characteristics	Valchromat E05 is a mass-dyed wood fiber panel with formaldehyde emission ≤ 0.05 ppm. The fibers are impregnated with organic dyes and chemically bonded to each other by a special resin which gives Valchromat unique physico-mechanical characteristics. Valchromat is an MDF.HLS, according to the EN 622-5 standard. The Valchromat panel, due to the use of organic dyes and the natural variation in the color of the wood, has differences in hue. This variation can be observed on the same face, between faces of the same panel, between different productions or thicknesses. Valchromat is a water-repellent panel, supplied unfinished, in which the application of varnish, wax or oil is essential. Whenever the panel is used in wet areas, such as kitchen worktops and bathrooms, it should be protected with varnish and the faces and fields should be well sealed. The Valchromat panel should not be used in areas where there is direct contact with water, such as kitchen worktop sink cutouts and shower cubicles. The Valchromat panel must be applied with a finish, in order to protect the surface, maintaining its natural appearance. The finish can be done with varnishes, waxes or oils. Any suitable varnish for wood can be applied over Valchromat. Two-component acrylic varnishes are widely used, as they do not yellow over time. When the finish is made with varnish, the first layer to be applied is a primer, also called “insulator” or “pore filler”. After the first layer has dried, the surfaces are sanded with a fine grain of 320, in order to eliminate the raised pores of the wood. Then, a finishing varnish is applied in one or two coats, depending on the manufacturer's prescription. Between coats, surfaces are sanded with 320 fine grit. It is recommended that the applied primer and clearcoat be from the same manufacturer so that there is no incompatibility between them. Waxes or oils are usually applied in a single coat to previously prepared surfaces. These types of finishes should not be applied to panels that will be installed in humid environments, such as kitchens and bathrooms. Avoid linseed oil type oils.

RED VALCHROMAT® (MDF) MEDIUM WORKTOP

2. Type in your custom dimensions

3. Add customization and protection options

You may also like

Premium natural bamboo wood worktop

Premium caramel bamboo wood worktop

Anthracite-black valchromat® (mdf) medium worktop

Light grey valchromat® (mdf) medium worktop

Chocolate brown valchromat® (mdf) medium worktop

Orange valchromat® (mdf) medium worktop

Technical specifications