Sanded with P80 and P100 grade sandpaper on 2 faces. Finishing sanding (P150) is to be performed before applying the finish.
Glued with white glue of the D3 class compliant with the NF-EN-204 standard and formaldehyde-free.
8 to 10% : Kiln dried quality. This rate grants a great stability to the wood in all interior uses.
Thickness: +/- 1 mm | Width: +/- 1 mm | Length: +/- 1 mm
Side A (best side)
Possible presence of low quantities of small healthy knots, puttied or not before sanding, few mesh traces.
Side B (worst side)
Identical to face A + healthy sapwood
In limited quantities, possible presence of small non-puttied knots, small pinholes, or any other singularity invisible at the time of cutting or machining
This product is made of "solid wood", in accordance with the decree n°86-583 of March 14, 1986 implementing article L. 214-1 of the French Consumer Code regarding furniture products.
Upon receipt, your wood should be stored in a clean and dry location. It wood must be stored flat, without direct contact with the ground (e.g. on brackets). If you have to store several panels, separate each panel with brackets to allow air circulation on all faces.
The application of a finish is essential to protect your wood. To obtain a professional result, we recommend that you choose the finishing option (availability depending on product). If you wish to apply the finish yourself, refer to the application instructions of the finish product manufacturer.
An oiled finish must be renewed regularly (6 to 12 months depending on the type of product used). A varnished finish should be renewed when it shows signs of wear. Do not allow water to stagnate on the wood. Do not clean with abrasive products. Do not put the wood in contact with hot objects.