100% okoume wood marine plywood, made of specially selected rotary cut veneer. Recommended for shipbuilding and the furnishing of boats.
Lightweight and with an excellent resistance to moisture, it can also be used in interior furnishing.
Note: suitable for the construction of hulls if and only if it remains on the interior face and is combined with fibreglass or epoxy resin for the part in contact with water. Whatever its use, it must be protected by a suitable finish (e.g. with a marine sealant).
For wood that is continuously in contact with seawater (e.g. pontoon, pier, etc.), prioritise wood of class 5.
Applications
- Nautical industry
- Bridges
Characteristics
- Resistance to moisture
- LLOYD’S Register Type Approved
Description
- Selected ply
- Structure and furnishing in shipbuilding Gluing Exterior gluing class 3 - E1
Standards
- Lloyd's Register Type Approved
- British Standard 1088-1:2003
- Classification of faces according to standard EN 635-2
- Gluing class according to standard EN 314-2
- CE marking according to EN 13986
Others
Special attention must be paid to ensuring the perfect waterproofing of the edges of the plywood panels used in exterior environments. 5 mm panels, CE NS marking for non-structural use, EN 13986. 10, 15 and 22 mm panels, CE S marking for structural use, EN 13986.
The markings on the panels by the manufacturer may leave a few traces of ink on the edges or both faces. These traces are compliant with our specifications because they disappear with sanding.
